Medical waste pyrolysis plant is able to decompose medical waste under high temperature, oxygen-free or low-oxygen conditions. The pyrolysis system converts the organic matter in medical waste into pyrolysis oil, carbon black and synthetic gas by heating.
Compared with incineration, pyrolysis produces less dioxins and harmful gases. The combustible gas and pyrolysis oil produced can be recycled to improve resource efficiency. High temperature can effectively kill pathogens and reduce secondary pollution.
Advantages of Medical Waste Pyrolysis
- Harmless treatment: high temperature (500-800℃) destroys pathogens (such as bacteria and viruses), with an inactivation rate of >99.99%.
- Effective treatment: volume reduction of 70-90%, and the residue is carbon black or ash.
- Resource recovery: can produce synthesis gas or liquid fuel oil.
- Low emission: closed system avoids dioxin generation, and tail gas is purified and discharged in compliance with standards.
- Strong adaptability: can treat mixed medical waste.
Contact Us To Get Medical Waste Pyrolysis Solution
As a professional pyrolysis plant manufacturer, Mingjie Group can provide effective solutions to reduce environmental pollution and recover resources.
Medical Waste Pyrolysis Plant for Sale
The medical waste pyrolysis equipment can transform medical waste from a health hazard into new energy through high-temperature sterilization, deep cracking and resource regeneration system operation.
The pyrolysis system treats medical waste through high temperature anaerobic decomposition technology. The pyrolysis plant can achieve the harmlessness, reduction and resource utilization of medical waste. It is especially suitable for the treatment of infectious, damaging and some chemical medical waste.
Small Pyrolysis Plant
- Skid-mounted design: The pyrolysis reactor, feeding system, condensation separation, tail gas treatment, and control system are integrated in a standard container.
- Compact and flexible: The small pyrolysis machine has a small footprint and is suitable for small-scale pyrolysis. It can process 1-2T/D waste tires.
- Quick installation: After the small pyrolysis machine is transported to the site, it only needs simple installation and commissioning.
Batch Pyrolysis Plan
- Can be loaded with whole tyres or packed plastic bale, without shredding.
- Capacity of 6-15T/D, which is suitable for small-scale or medium-scale production.
- Low investment cost and high slag discharge efficiency.
- Equipped with dewaxing device to effectively avoid pipe clogging problems during plastic processing.
Semi Continuous Pyrolysis Plant
- Feeding size shall be 5-8mm rubber granule, tyre shall be shredded and steel wire will be removed.
- Processong capacity 15-16T/D tyre, 12T/D plastic.
- Equipped with auto feeder system, feeding can be done at high temperature.
- From feeding to discharging, the whole press is sealed, operation environment is clean.
Fully Automatic Pyrolysis Plant
- Feeding size shall be 5-8mm rubber granule, tyre shall be shredded and steel wire will be removed.
- Processong capacity 35-40T/D tyre, 30T/D plastic.
- Fully continuous feeding and discharging in 24hours.
- From feeding to discharging, the whole press is sealed, operation environment is clean.